Futaba 10PX transmitter + 2x R404SBS-E receiver (bundle)

Scope of delivery:
1x Futaba T10PX
2x Futaba R404SBS-E

Full-color LCD touchscreen
The T10PX features a 4.3-inch HVGA backlit color LCD touchscreen. The screen is transflective and can be used both indoors and outdoors.

F-4G system and telemetry
Equipped with an F-4G system that enables telemetry with faster response than the T-FHSS SR system.

10 channels
Up to 10 channels can be operated together with the S.BUS2 system.

T-FHSS MINIZ system
If you set the MINIZ system in the receiver settings menu, you can use the dedicated Kyosho Mini - Z Evo receiver RA-42. The dedicated receiver RA-42 must be purchased separately.

Updatable software
The software can be updated via microSD card. The model data can also be saved on a microSD card. In addition, telemetry log data can be saved.

model memory for 40 models
Model names can contain up to 15 letters, numbers and symbols, so logical names can be used. The model copy function can be used to create a model memory with different setups.

paddle switch + floor switch + 3-position switch
A paddle switch near the steering wheel, a 3-position switch on the handle and a floor switch on the bottom are equipped to support multiple channels and functions.

Lipo battery can be used
The optional LT2F2000B LiPo battery can be used to power the transmitter, extending the runtime.

brake compound for large vehicles
The brake mix of the front and rear wheels of 1/5GP and other large vehicles can be adjusted independently.

steering mixture
The independent adjustment of the left and right steering servos enables smooth cornering.

4WS compound for tracked vehicles and other 4WS types
This function can be used on crawler vehicles and other vehicles with 4-wheel steering.

Double ESC mixture for tracked vehicles
The front and rear controls are controlled independently.

gyro mix
The sensitivity of the Futaba auto gyro can be adjusted via the T10PX.

tank mixture
This feature is intended for vehicles such as tanks.

CPS mixture
The LED lighting and flashing control with our CPS 1 channel power switch can be connected to the steering and accelerator pedal by a single switch.

S.BUS servo
This is a special function that allows setting the parameters of our S.BUS servo, whose settings are changed using the PC-Link software.

MC-Link
This is a special function that allows setting the contents of the link software, which makes it possible to change the variable frequency of Futaba speed controllers (ESC), MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. and other data via PC on the T10PX.

throttle speed
Suddenly releasing the accelerator pedal on a slippery road will only cause the tires to spin and the model to not accelerate smoothly. By adjusting the throttle function, the operation can be carried out smoothly and easily and the battery consumption is reduced.

steering speed
If you feel that the steering servo is too fast, the servo speed (direction that suppresses the maximum speed) can be adjusted.

non-telemetry LED
When the telemetry function is turned off, to confirm that the telemetry function is not operating.

dial selection function
This function assigns functions to the adjustment wheels (digital trim, grip wheel, rotary knob). The step size and the direction of operation can also be set. Positioning the trim every time the model is called up is not necessary, as all adjusters are digital.

switch selection function
This function assigns functions to 10 switches. The operating direction can also be set.

Wheel and trigger position can be changed
The wheel position can be adjusted with an APA wheel position offset adapter.
The position of the throttle lever can be moved forward and backward.

rubber grip
By replacing the rubber handle you can switch to a narrow handle.

trim/controller lock functions
There are locking functions that prevent the adjustment and operation of the transmitter trim and the adjustment wheels.

support for left-handed people
The left and right installation direction of the wheel part can be reversed.

Vibrator integrated into the handle
The vibrator can be used for navigation of lap times, timing and low battery and telemetry alarms.

USB port
The transmitter can be used as a game controller by connecting it to a computer with a USB cable. (Some games cannot be used.)

Features of the transmitter:

• wheel system, 10 channels (F-4G system), 4 channels with TFHSS-SR, T-FHSS system
• Transmission frequencies 2.4 GHz band/transmitting RF output power: 100 mW EIRP
• Protocols T-FHSS-SR/T-FHSS/S-FHSS/F-4G
• Power requirement LiPo - NLF2F2000B (7.4 V)
• LiFe - FT2F1700BV2 (6.6 V)
• Current consumption 350 mA or less (with T-FHSS, vibration off, backlight on)
• transmitting antenna 1/2λ dipole
• 4.3 inch backlit color TFT liquid crystal touch panel* *When you turn on your 10PX, bright dots may appear on the screen. Your display contains an extremely large number of TFTs and is manufactured using high-precision technology. Any bright dots that may appear on your display are a characteristic of the TFT manufacturing technology

Technical data of the R404SBS receiver:

• F-4G protocol
• Dimensions 1.00×0.81×0.42 inches
• 25.5×20.7×10.6 mm
• Weight 5.7 g
• 0.2 ounces
• Operating voltage DC 3.7-7.4V

PACKAGE CONTENT

• T10PX transmitter
• R404SBS receiver
• dry battery holder
• Wheel offset adapter two sizes (APA)APA mounting screws *Spare screws are also included
• wheel adapter 32 degrees
• wheel angle spacer 5 deg
• large diameter steering wheel
• trigger guard (Lx1/Rx1)
• grip rubber x1
• Blind Shovel x2
• hex key
• Short Manual